8. High Voltage Stator Coils

Everson Tesla Incorporated fabricated hard coils featuring "B" stage class "F" temperature insulation. Coils were used in re-wind of large power generator. Coils supplied with all connecting and winding materials including wedges.

9. Klystron Tube Magnet Assembly

Everson Tesla recently teamed with the Microwave Power Tube Products Division of an OEM to design and build a 150 Mw S-band Klystron unit for DESY. Everson Tesla's responsibilities included the design and assembly of the liquid-cooled, foil conductor, electromagnet and auxiliary gun coil assembly to be used for electron beam focusing.

10. Beam line Quad & Gantry Dipole Magnets

Everson Tesla manufactured eighteen 45° and six 135° dipole magnets for use in the patient treatment gantries at the Loma Linda Proton Beam Therapy Facility. Additionally, sixty-seven identical quadrupole magnets were fabricated for the proton beam line. The 45° bending magnets were approximately one meter long and the 135° bending magnets were approximately 3 meters long configured in a circular arc. Recently Everson Tesla began a design for the mass production of these magnets for multiple systems production.

11. Sextupole and Trim Quadrupole Magnets, Brookhaven National Lab, RHIC Project

Everson Tesla fabricated 400 sextupoles and trim quadrupoles for the Relativistic Heavy Ion Collider (RHIC) in 1994 and 1995 for Brookhaven National Laboratory. The primary purpose of these magnets is to reduce the natural chromaticity and to correct field imperfections in the dipole magnets. These magnets were all delivered on time and within budget.

12. Fermilab Main Injector Ring Dipoles

In 1997 Everson Tesla completed production of 738 main injector dipole coils that served to improve the luminosity of Fermilab's Tevatron. These water-cooled coils are pulsed to 10,000 amps with a maximum hold time of 1.2 seconds and a ramp rate of 1 second. They were manufactured from 25 mm by 100 mm hollow conductor wound in a single layer. The coils consist of roughly equal numbers of 6 meter and 4 meter long coils. Each set of upper and lower coils consists of one coil with 3 1/2 turns and the other with 4 turns.

13. Separator Magnet System

14. High Voltage Stator Coils

Everson Tesla Incorporated refurbished a set of high voltage generator stator coils for a South American utility. The coils were removed from a generator and sent to EEC. The coils were stripped of all old insulation, re-shaped and re-insulated with all new Class "F" insulation. The coils along with all winding material were returned to customer for rewinding the generator.

15. NJT AC Traction Motors

Everson Tesla Incorporated teamed with an OEM to manufacture 700 plus traction motors which were used in high speed train cars at New Jersey Transit Authority. THE MJA-300-5 traction motor is a 3-phase squirrel cage type asynchronous motor with separate ventilation. The motor output is 125 hp and a speed of 3200 rpms.

16. Baltimore AC Traction Motors

Everson Tesla Incorporated teamed with an OEM manufacturer and built 116 plus traction motors used on light railed vehicles that operate from downtown Baltimore to BWI airport. The MJB 260-1 traction motor is a 3-phase squirrel cage type asynchronous motor with separate ventilation. The motor output is 155 KW and a speed of 2960 rpms.

17. AC Stator Coils Medium and High Voltage

Everson Tesla Incorporated fabricates both medium and high voltage stators used in transportation and power generation. Turn and ground insulation temperature varies from Class "F" to Class "H" for impregnated and unimpregnated coils. These coils are manufactured to OEM or customer specifications.

615 Daniels Road - Nazareth, PA 18064
(610) 746-1520 - FAX (610) 746-1530